Get extra shade and undercover shelter for your RTT with the convenient Hi View/Panorama 1400 Annex from Darche.
This annex is designed to be used with the separately available Hi-View 1400 or Panorama 1400 rooftop tents from Darche. It’s made from 210D oxford polyester ripstop to hold up to the harsh Aussie environment and features a 550gsm PVC zip off bucket floor which also has adjustable corner points. There are three entries to this annex, each with dual-zippered privacy, superfine insect mesh doorways, and a rear opening so you can get to your vehicle. If you want to set up extra shade, easily convert the privacy doors into awnings with some separately available telescopic alloy poles.
The Hi View/Panorama 1400 Annex from Darche creates more shade, storage and shelter options for your rooftop tent setup.
Adds more privacy and shelter
1.8M drop is ideal for many camper trailers, 4WD utes and SUV setups between 1600mm and 1900mm
2.1M drop is ideal for higher camper trailers, lifted 4WD utes and larger 4WD wagon setups between 1900mm and 2200mm
Constructed from 210 denier oxford polyester
550gsm PVC zip off bucket floor with adjustable corner anchoring points
Compatible with the separately available Hi-View or Panorama 1400 RTT
3 entries for accessibility and rear opening for vehicle access
Zippered super-fine insect and zippered privacy doors
Privacy doors converts to awnings with separately available telescopic alloy poles
Storage bag included with annex
250L x 200W x 180H cm
30L x 30W x 50H cm
Max. Head Height:
210D Oxford Polyester Ripstop
550gsm PVC Zip off Bucket Floor
Not Specified by Darche
Dimension measurements 1 answer
Can you please advise what the distance is between the ladder inside annex and rear wall of annex?
Jos - Mandurah, WA(1 year ago)
The annex attached at the hinge of the rooftop tents base, so the distance between the ladder and the annex will be half of the base length. In the case of the Panorama or Hi-View 1400 it's around 1.2m. At ground level, it will be more than that, as the bottom of your ladder will be out on an angle. Hope that helps!