Ensure your existing Eclipse 180 Rear or Versatile Awning reaches its full potential by kitting it out with the Eclipse Compact Awning Wall Set from Darche.
This wall can be set up on your awning as an extension, or as a wind or weather break and provides up to 11m2 of coverage when anchored down depending on your vehicle. It comes with 3 sections per kit, with zips to separate the panels for various wall configurations, and a zippered door on the centre panel for easy access. Constructed from 260gsm poly/cotton grid ripstop canvas, which is HF seam-sealed complete with 1500mm PU waterproofing – this panel is made to stand up to use in a harsh environment.
Complete your touring set up by adding the Eclipse Compact Awning Wall to your current Eclipse 180 Rear or Versatile Awning from Darche.
Acts as a wind/weather break or as an awning extension
3 sections of walls per kit
1300mm wide zippered door on the centre panel
Zips separating panels allows various wall configurations
Made from 260gsm poly/cotton grid ripstop canvas
1500mm PU waterproofing with HF seam sealing
Pegs and ropes included
When walls are anchored it provides approx. 11m2 of coverage depending on vehicle height
Darche Eclipse 180 Versatile Awning
Main Wall: 965L at base x 225H cm | Rear Walls: 127L at base x 210H cm
50L x 40W x 12H cm
260gsm Poly Cotton Ripstop Canvas
Shorter Car1 answer
Will the sides work/ be able to be fully utilised if attached to a car which is only 165cm tall with roof rack?
Danika - Atherton, QLD(5 months ago)
The walls are designed to work best with awnings that are mounted at around 1.9-2m off the ground. You could use these walls when mounted to a lower vehicle, but you'll just have to set up the walls at a wider angle. It won't be ideal, but should still work ok.
Leece - Snowys(5 months ago)
Does it come with the smaller front-side walls? (The ones that enclose it to the side of the car) They are pictured in the 3rd photo, but the description only states it comes with 3 walls. If they aren’t included, do you sell them? Cheers
Mitch - Brisbane City, QLD(10 months ago)
Yes, the 3 walls are: 1 x single wall pannel across the whole front of the awning 2 x rear awning panels
Lauren - Snowys(10 months ago)
Eclipse 180 versatile awning wall set1 answer
In the picture plans of the wall set, you have one picture showing the rear of the vehicle. In this picture there are two triangular shaped black panels. Are these designed as an infill from the outer edge of the awning and the side of the vehicle?
Rob - Perth 6111(11 months ago)
Yes, they are. Whilst this particular awning can be used on the side of a vehicle as well, it was primarily designed as a rear vehicle awning, so the wall set reflects this.
Lauren - Snowys(11 months ago)
Total dimensions 1 answer
I can’t figure out the dimensions once the walls are on...how much wider is the shelter? I’m wondering if my Darche dusk to dawn double swag would fit inside this? I know without the walls the swag and awning are the same width.
Rachel - Picton, NSW(2 years ago)
It took me a little while to work out exactly what you meant, but I think I understand. The walls taper out so create more space at the ground level. Darche doesn't give an exact figure, however, my best estimate is about an extra 50cm of width between where the poles would normally sit, and where they'll sit once angled with the tapered walls. Did you want us to give Darche a call and double-check if they have an exact figure? If so, just send us a quick email and we'll follow it up for you.
Leece - Snowys(2 years ago)
180 wall set1 answer
Hi Im just wondering what the difference is with the Darche Eclipse 180 Awning Wall Set and this? The pics are confusing me.